Friday, September 14, 2012

EIGRP Lab-01

I created a topology for EIGRP Exercise and the tasks.  Enjoy Labbing !!!




Task 1 : Configure EIGRP AS 100 on R1,R2,R3,R4 and R5.

Task 2 : Advertise Networks in EIGRP as below :
·         R1 ( 10.1.12.0/24, 10.1.13.0/24, 1.1.1.0/24)
·         R2 (10.1.12.0/24, 10.1.23.0/24, 192.168.24.0/24)
·         R3 (10.1.13.0/24, 10.1.23.0/24, 192.168.35.0/24)
·         R4 (192.168.24.0/24, 4.4.4.0/24)
·         R5 (192.168.35.0/24, 5.5.5.0/24)

Task 3 : Verify EIGRP Neighbour Relationships on R1,R2, R3, R4 and R5.

Task 4 : Analyse the result of “show ip protocols” command on R1,R2, R3, R4 and R5.

Task 5 : Analyse the result of “show ip route eigrp” command on R1,R2, R3, R4 and R5.

Task 6 : Analyse the result of “show ip route 10.1.23.0” command on R1.

Task 7 : Analyse the EIGRP topology table on R1 and study FD value of 4.4.4.0/24 and 192.168.24.0/24.

Task 8 : Shutdown the link between R1 and R2, and analyse the routing table of R1. 
“traceroute  4.4.4.4” from R1.  Analyse the traceroute result before and after shutdown the link.

Task 9 : Analyse the EIGRP topology table on R1 and compare FD value of 4.4.4.0/24 and 192.168.24.0/24.

Task 10: What are the EIGRP router id of R1, R2, R3, R4 and R5. And What do you realize ?

Task 11: Configure the routers in AS 100 ONLY use the bandwidth parameter to calculate their metric and analyse the result by using "show ip eigrp topology" command on R1, R2, R3, R4 and R5.
 

No comments:

Post a Comment